Skip to content
Discuss Your Project
  1. Home
  2. Blog
  3. Resort architecture: site planning, density and climate

Resort architecture: site planning, density and climate

13 min read

Resort architecture is the planning of a spread-out site where accommodation, dining, sport, entertainment and landscape share one plot. In Turkey, the closest single facility type is the holiday village: dispersed, at most three storeys on any facade, 60+ rooms, four or five stars. The zoning plan's floor area ratio caps how many rooms fit. On hot coasts such as Antalya, summer shade and winter rain shape the layout.

How does resort architecture differ from a city hotel?

Resort architecture designs the whole site. In a city hotel most decisions sit in one building's floor plans; in a resort, rooms, restaurants, pools, sports areas and service roads spread across a master plan. Walking distances, views, shade and the separation of noisy uses are set at that scale.

Turkish rules make the difference concrete. The Regulation on the Qualifications of Tourism Facilities sets no storey limit for hotels. A holiday village, however, needs a dispersed layout and at most three storeys. Hotels are classed from one to five stars; holiday villages only four or five.

How does Turkish regulation define a holiday village?

Under Article 20 of the regulation, a holiday village is an accommodation facility in natural surroundings, built with care for natural and local values. Accommodation is its main business; food, sport and entertainment support it. Its buildings follow a dispersed layout and read as no more than three storeys on every facade. Its class is four or five stars.

CriterionHotelHoliday village
Star class1 to 5 stars4 or 5 stars
LayoutNo requirement in the regulationDispersed layout
StoreysNo limit in the regulation; set by the zoning planAt most 3 storeys on every facade
Minimum rooms5 at 1 star; 10 at 2–4 stars; 60 at 5 stars60 (80 until 16 March 2023)
Room size (incl. bathroom)At least 20 m² at 4 stars, 25 m² at 5 starsAt least 20 m² at 4 stars, 25 m² at 5 stars
Restaurant capacityAt 4 and 5 stars, at least 30% of bed capacity at one timeAt least 30% of bed capacity at one time
ParkingAt 5 stars, 10% of the room count, with attendant service10% of the room count
Noise protectionNo provision in the hotel articleGuest rooms protected from noise of other units
Accessible roomsIn facilities with 80+ rooms and at 4–5 stars, 1% of rooms, at least 11% of rooms, at least 1
Main minimum requirements for hotels and holiday villages in Turkey, as of November 2026; the hotel column includes requirements inherited from lower classes. Source: Regulation on the Qualifications of Tourism Facilities, arts. 18–20; amendments Official Gazette 16.03.2023, Decision 6969 and Official Gazette 22.12.2024, Decision 9287

Two rules shape the master plan directly. The first is noise: holiday village guest rooms must be protected from disturbing effects of other units, such as noise. The hotel article has no such provision. A holiday village must also secure its boundary and have an entrance control point.

The second is the storey limit. The text says "on every facade"; on a literal reading, the lower facade on a slope must not exceed three storeys either. Blocks therefore often step down the terrain. Before design starts, confirm with the Ministry of Culture and Tourism how the rule applies to slopes, basements and roof floors.

In the regulation, each hotel class adds to the requirements of the class below. The 3- and 4-star articles state no room count, so the 10-room minimum is our reading; confirm it with the Ministry.

The room size rule dates from December 2024 and excludes protected heritage buildings; see our guide to hotel room sizes. How facility type links to licensing is covered in our guide to the tourism operation licence in Turkey. This section is not legal advice; check the current text with the Ministry.

Should a resort use blocks, villas or a mixed layout?

In resort architecture the layout type follows plot size, floor area ratio, storey limit, target room count and guest profile. A compact block puts many rooms on little land and shortens service distances. Villa and bungalow clusters offer gardens and privacy but need more land. A mixed layout combines the two.

  • Compact block. Rooms sit in one or a few blocks, with lobby, restaurant and kitchen attached. In Turkey, blocks above three storeys fall outside the holiday village definition. The facility is then, as a rule, licensed as a hotel.
  • Dispersed cluster. One- to three-storey room blocks around shared gardens; the layout closest to the holiday village definition.
  • Villas and bungalows. Each unit stands apart with its own garden or terrace, giving the most privacy and the most land per unit.
  • Mixed. A main building holds the lobby, restaurants and standard rooms, surrounded by suite or villa clusters.

Some countries codify these choices in detail. The Maldives Ministry of Tourism's 2023 resort development handbook limits guest rooms to three storeys and 12 m. Back-of-house buildings may reach 15 m. It requires at least 2 m between beach rooms and 150 m between over-water room wings and jetties.

In our view, the quickest test is how far guests walk from room to restaurant and beach. A larger dispersed plan means longer footpaths, service roads and utility runs; a compact plan spreads views and privacy over fewer units. Decide alongside the room count in the feasibility study, as our article on the stages of a hotel project explains.

Before drawing a master plan, gather:

  1. Zoning status and plan notes: floor area ratio, height, setbacks and minimum plot size.
  2. Survey drawing: slope, existing trees, stream beds and neighbouring buildings.
  3. Climate data: monthly temperature, sunshine and rainfall.
  4. Facility type and class: hotel or holiday village, and star rating.
  5. Room programme: standard rooms, family rooms, suites and villas.
  6. Operating model: all-inclusive or bed and breakfast; this sets restaurant and kitchen numbers.
  7. Service route: staff, deliveries and waste kept apart from guest paths.

How is density calculated in a resort master plan?

In a resort, the upper limit of density is set by the zoning plan's floor area ratio (FAR), called emsal or KAKS in Turkey. FAR is total floor area divided by plot area. Bed density, the number of beds divided by plot area in hectares, helps compare sites. Turkey's tourism regulation sets no land area for holiday villages; plans do.

One example is the 2012 report of the Ministry of Environment and Urbanisation's 1/25,000 environmental plan for Adrasan, a coastal settlement in Kumluca, Antalya. For hotels and holiday villages it sets a maximum FAR of 0.30 and a maximum height of 6.50 m (2 storeys). The smallest plot that may be created by subdivision is 7,500 m².

The document shows no approval date, and we have not confirmed the plan's current status; these conditions are only an example. The same report excludes open pools, open play areas and passages linking buildings from the FAR. Your plot's current conditions come from the zoning status certificate.

Total floor area = Plot area × Floor area ratio

InputExample valueBasis
Plot area7,500 m²Smallest plot created by subdivision, Adrasan report
Floor area ratio (emsal)0.30Adrasan report, hotels and holiday villages
Rooms60Minimum for a holiday village
Room size (incl. bathroom)25 m²Minimum at 5 stars
Beds per room2Assumed double room

Bed density (beds/ha) = Number of beds ÷ Plot area (ha)

Example: 7,500 × 0.30 = 2,250 m² total floor area. The rooms' net area is 60 × 25 = 1,500 m², about 67% of the permitted area. FAR counts gross area, so walls and shafts would push this higher. That leaves 750 m² for lobby, restaurant, kitchen, corridors and plant rooms. Bed density is 120 ÷ 0.75 = 160 beds/ha.

Density check for the smallest holiday village. The plan condition is an example from a 2012 plan report whose current status we have not confirmed; calculation by Picco Architecture. Source: Ministry of Environment and Urbanisation, Adrasan 1/25,000 environmental plan provisions, 2012; Regulation on the Qualifications of Tourism Facilities

Under a strict plan, even the smallest holiday village the regulation allows comes close to the FAR limit. Its restaurant must serve at least 30% of 120 beds, or 36 guests at once, and parking must cover 6 cars. On a 20,000 m² plot the same 60 rooms use a quarter of the permitted floor area. In our view, resort architecture should run this check before room numbers are discussed.

In the Maldives, density is also measured along the shore. The same handbook caps built-up area at 50% of island area. It requires at least 3 m of beach per room, with guest rooms on at least 60% of the beach length. So an island with 900 m of beach can take at most 300 rooms. According to a 2012 statement by the Maldivian President's Office, the land share for tourist facilities rose that year from 20% to 30%.

How should resort architecture respond to a hot climate?

In a hot climate, resort architecture builds circulation that is shaded in summer and covered against winter rain. In Antalya the average daily maximum exceeds 34 °C in July and August, with over 11 hours of sunshine a day. About 60% of annual rainfall falls from December to February. On a dispersed plan, shade and shelter are part of the layout.

  • Avg. maximum (°C)
  • Average (°C)
  • Avg. minimum (°C)
010203040JanMarMayJulSepNovDec16.711.77.7
Monthly average, average maximum and average minimum temperature in Antalya, measurement period 1930–2025. Source: Turkish State Meteorological Service, official climate statistics for Antalya
Show the data as a table
MonthAvg. maximum (°C)Average (°C)Avg. minimum (°C)
Jan15.010.16.1
Feb15.610.76.4
Mar18.012.98.1
Apr21.416.411.3
May25.720.715.3
Jun30.825.419.7
Jul34.228.622.9
Aug34.128.522.9
Sep31.225.319.6
Oct26.620.615.4
Nov21.415.610.9
Dec16.711.77.7

The same statistics give average daily sunshine of 11.7 hours in July and 4.8 in December. Rainfall totals 19.7 mm from June to August and 624.5 mm from December to February. The highest daily rainfall, 331.5 mm, fell on 17 January 1969. In our view, roof and surface drainage should therefore be sized for winter downpours, not summer.

In the resort layout, hot-climate principles work as follows:

  • Orientation. The Australian Government's Your Home guide advises minimising east and west glazing, as low morning and afternoon sun is hard to block with fixed shading. It names adjustable vertical shading as the best option there.
  • Eave depth. For Australia at 27.5° south and beyond, the guide's rule of thumb sets eaves over equator-facing windows at about 45% of the sill-to-eave height. In our view, eaves in Antalya, where the equator-facing side is south, should be sized from local sun angles instead.
  • Effect of shade. The guide says effective shading can block up to 90% of heat from direct sun. It calls unprotected glass often the largest source of heat gain in homes.
  • Covered links. On a dispersed plan, paths linking room clusters to the lobby and restaurants are covered with pergolas, canopies or galleries. The Adrasan report excludes linking passages from the FAR; ask the zoning authority whether a covered or enclosed gallery qualifies.
  • Ground and planting. In hot humid climates the guide favours vegetation over hard surfaces, which keeps the ground cooler and cuts heat reflected onto buildings.

Antalya's average January minimum is 6.1 °C. In a resort open all year, winter facilities such as the indoor pool, spa and restaurant should link to room clusters by covered routes. In our view, a master plan drawn only for summer leaves winter guests walking in the rain.

What resort and hotel projects has Picco Architecture worked on?

As of November 2026, Picco Architecture's project archive holds 14 records in the hotel category; one is the Via Largo Resort Villa project in Benghazi, Libya. Antalya entries include Baia Otel in Kundu and Concept Boutique Otel in Manavgat. Ten records are in Batumi and Tbilisi, Georgia.

  • 14project records in the hotel category
  • 3countries: Georgia, Turkey and Libya
  • 1resort project: Via Largo Resort Villa, Benghazi
  • 72project records in Antalya (out of 156 across all categories)
Picco Architecture's project records in the hotel category and its total number of projects in Antalya. Source: Picco Architecture project archive, November 2026

The Via Largo Resort Villa record covers design services. The Georgian records date from 2023 to 2026. The full list is on our page of hotel and resort projects in Batumi, Tbilisi, Antalya and Benghazi.

In our approach, resort architecture starts with site, plan conditions and climate data, before the room plan. Turkey's holiday village rules do not apply in Libya or Georgia; each country's rules are read separately.

Let’s discuss your hotel project.

Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.

Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50

Contact Details
How did you hear about us? (Optional)

Please confirm that you have read the privacy notice to continue.

Frequently asked questions

Is a resort the same as a holiday village in Turkey?

Resort is an international term for leisure accommodation with recreation; Turkish regulation has no facility type of that name. The closest single facility type is the holiday village: dispersed layout, at most three storeys, at least 60 rooms, four or five stars. In our view, holiday centres (art. 39, areas combining several hotels), tourism complexes (art. 38) and five-star hotels with dispersed or low-rise layouts (art. 19/6-b) can also house resort-like facilities.

How much land does a resort hotel need?

Turkey's tourism regulation sets no minimum land area for holiday villages or hotels; zoning plans set plot conditions and FAR. In the 2012 Adrasan plan report, whose current status we have not confirmed, the smallest plot that may be created by subdivision is 7,500 m². Its FAR is 0.30. On such a plot, the rooms of a 60-room five-star holiday village alone use about 67% of the permitted floor area.

Can a holiday village in Turkey have four storeys?

As a rule, no. The regulation defines a holiday village as a facility made of buildings that read as no more than three storeys on every facade. A zoning plan can set a lower limit; the 2012 Adrasan plan report, for example, allows 6.50 m and 2 storeys. If blocks of four or more storeys are wanted, the facility is designed as a hotel, not a holiday village.

How are entertainment areas separated from guest rooms in a resort?

The regulation requires holiday village guest rooms to be protected from disturbing effects of other units such as noise. It gives no distance or decibel value. In our view, distance works best: stages, bars and water parks sit away from room clusters, buffered by planting or a service building. Generators and cooling towers follow the same principle.

What information is needed before starting a resort design?

Before design starts, settle zoning status and plan notes, the survey drawing, facility type and class, room programme and operating model. For climate, the Turkish State Meteorological Service publishes monthly temperature, sunshine and rainfall averages by province. In our view, gather all of this in one brief before drawing any layout.

The first step in resort architecture is to put the plan conditions, climate data and target facility type on one table; room numbers follow those three inputs. To review your site with us, get in touch.