Clinic interior design services: which drawings and documents at each stage?
The key interior design services in a clinic project are, in order: measured survey and brief, layout plan and concept, licensing drawings, construction drawings with services coordination, schedules for materials, furniture and lighting, budget, site supervision or turnkey delivery, and a handover file. Each of these clinic interior design services produces a scaled drawing, a schedule or an approved document. Where a pre-approval is required, these drawings come before any investment.
Which clinic interior design services matter most?
The most important clinic interior design services are those that shape the licence and the works on site. They are an accurate survey, a brief that fits the facility type, a layout plan consistent with the licensing file and construction drawings matched to the building services.
| Stage | Interior design service | Deliverable (drawing, schedule, document) | Picco service |
|---|---|---|---|
| 1. Initial review and measured survey | Measuring the space; checking the floor, entrance, existing services and occupancy permit | Survey plans and sections, existing service points, initial review note | Architectural design |
| 2. Brief | Listing facility type, number of rooms and dental units, staff and equipment | Brief table, equipment list | Interior design |
| 3. Layout and concept | Layout options, patient and staff flows, concept | Layout plan at 1:100 or 1:50, concept board, 3D visuals | Interior design |
| 4. Licensing drawings | Preparing the drawings for the pre-approval and licence file | Plans for the licence, alteration or revised project | Architectural design, technical design and construction drawings |
| 5. Construction drawings and coordination | Detailing; matching equipment, services and lighting points | Construction plans, ceiling and floor plans, details, coordination plan | Technical design and construction drawings |
| 6. Materials, furniture and lighting | Selecting materials, furniture and luminaires | Finishes schedule, material and colour board, furniture schedule, lighting plan, technical specification | Interior design, design budgeting |
| 7. Budget | Quantities, costs and comparison of alternatives | Bill of quantities and cost estimate, schedule of works, programme | Design budgeting |
| 8. Works on site | Checking the works against the drawings, or carrying out the works | Site visit reports, sample approvals, snagging list | Site supervision, turnkey delivery |
| 9. Handover | Recording the finished condition | As-built drawings, handover certificate, warranties | Site supervision, turnkey delivery |
The first seven stages are design and preparation. Who runs the last two depends on the delivery model: the investor, the designer or a contractor. The profession's general role is covered in what an interior designer does.
The RIBA Plan of Work 2020 sets out the same path in eight stages, from Strategic Definition to Use. The brief corresponds roughly to its Stage 1 (Preparation and Briefing), and construction drawings with coordination to Stages 3 and 4 (Spatial Coordination, Technical Design).
Why do the survey, brief and concept come first?
The survey, brief and concept come first because every later drawing relies on their dimensions and decisions. Minimum room sizes and required units are set by regulation. A wrong survey means the licensing drawing and the built work will not match; an incomplete brief means the layout is redrawn.
In Türkiye, the regulation on private outpatient healthcare facilities was replaced in April 2025. It covers medical centres, polyclinics, physiotherapy facilities and doctors' practices, and allows only up to 2% deviation from its minimum physical standards. For example, a unit with a 20 m² minimum may not fall below 20 × 0.98 = 19.6 m². The dental facilities regulation has no such margin. In our view, room sizes should therefore be checked on the layout plan net of wall finishes.
These three stages deliver:
- Measured survey: plans and sections; columns, beams, doors and windows; existing water, drainage, electrical and ventilation points.
- Brief: facility type, room list and sizes, number of dental units or consulting rooms, staff numbers and an equipment list.
- Concept: two or three layout options, a patient and staff flow diagram, a material and colour direction, and 3D visuals.
The brief also feeds the licensing file. Under the new regulation, a medical centre's observation beds and consulting rooms are written on its pre-approval certificate, and space beyond the pre-approved capacity earns no extra staff positions. Room numbers are therefore set with the staffing plan.
In the United States, the 2014 Facility Guidelines Institute (FGI) edition strengthened earlier functional program requirements, making the program "a minimum standard rather than an optional planning document". The owner is responsible for it; designers often help write it.
Which drawings and documents are needed for a clinic licence in Türkiye?
Licensing drawings in Türkiye depend on the facility type. Non-dental polyclinics and medical centres need a pre-approval before opening; dental facilities other than single practices need one before investing. Under the outpatient regulation, the pre-approval file contains architectural drawings, and the interior layout must match their dimensions and room names.
- Non-dental polyclinic and medical centre: under the April 2025 regulation, a medical centre, polyclinic or physiotherapy facility needs a Ministry of Health pre-approval before opening (Art. 9/1). If the Ministry finds the Annex 7 drawings suitable, three sets are prepared in line with zoning law. The municipality approves them, or the governorship outside municipal areas (Art. 9/3). A complete application is decided within 30 days at most (Art. 9/4).
- Alterations to an existing building: the alteration project must be approved by the Ministry before work starts (Art. 9/7). In a licensed building, alterations that affect neither the structure nor the gross area are made on the licence drawings with Ministry permission, without municipal approval (Art. 9/6).
- Oral and dental facilities: under the regulation on private oral and dental health facilities, all except single practices obtain a pre-approval before investing (Art. 12/1). The licence application uses the documents in Annex 2 (Art. 13/1).
- Changes to a licensed dental facility: the physical areas behind the licence cannot change without the provincial health directorate's permission (Art. 27/2-ç). Major repairs and alterations need municipality-approved revised drawings (Art. 15/10).
Under Türkiye's zoning regulation for planned areas, architects prepare the architectural project, and the relevant engineers prepare the electrical and mechanical projects. The interior designer prepares the layout and interior drawings and keeps them consistent with the licensing file.
Document lists sit in the regulations' annexes and change often. This section is not legal advice; confirm the current regulations and document list with the provincial health directorate. We compare dental facility types in requirements to open a dental clinic in Türkiye.
Is coordinating medical gas, suction and electrics the interior designer's job?
Engineers design the medical gas, suction and electrical systems; coordinating them is usually part of the interior design service. From the layout, the interior designer fixes the positions of equipment, sockets, lighting and the suction, compressed air and medical gas outlets, and gathers them on one coordination plan. The engineer designs pipework, capacity and safety devices around it.
The international standard for medical gas pipelines is ISO 7396-1. It covers the design, installation, testing, commissioning and documentation of oxygen, medical air, nitrous oxide, carbon dioxide and vacuum pipelines. Vacuum systems for dentistry are outside its scope; central dental suction equipment falls under ISO 10637.
The coordination stage delivers:
- Equipment layout plan: position and size of dental units, X-ray, autoclave, compressor, suction plant and examination equipment.
- Power and data points plan: sockets, data, light switches and equipment supplies.
- Ceiling plan: luminaires, ventilation grilles, access panels and ceiling heights.
- Floor outlets plan: dimensioned positions of water, drainage, compressed air and suction outlets.
What does the interior designer do with furniture, materials and lighting?
The interior designer selects furniture, materials and lighting and turns the choices into schedules that contractors can price and order from. The drawing standard of Türkiye's Chamber of Interior Architects includes the finishes schedule, the material and colour board and the technical specification in the construction drawings.
- Finishes schedule: floor, wall, ceiling, skirting, door and worktop materials for every room.
- Material and colour board: every surface with its sample code.
- Furniture and fittings schedule: size, quantity, material and supplier of fixed and loose furniture.
- Lighting plan and luminaire schedule: luminaire type, quantity, colour temperature and controls.
- Technical specification: material quality, installation method and acceptance criteria.
Design budgeting, one of Picco's services, comes in here. As described on our website, material options, manufacturing methods and implementation alternatives are compared for cost, quality and service life. The chosen option goes into the finishes schedule, so every quotation prices the same list.
Which delivery model fits: design only, site supervision or turnkey?
There are three delivery models. In design only, the designer hands over drawings and schedules and the investor runs the works. In design and site supervision, the designer checks the works against the drawings. In turnkey delivery, the office that designed the clinic also builds it and hands it over ready for use.
The minimum fee specification of Türkiye's Chamber of Interior Architects treats supervision on the client's behalf as a service separate from design.
Each model adds to the one before:
- Design only: drawing set, schedules, bill of quantities and schedule of works.
- Design and site supervision: in addition, site visit reports, sample and joinery approvals, and a snagging list.
- Turnkey: in addition, the works programme, procurement, services tests, as-built drawings and a handover certificate.
Our turnkey dental clinic guide covers the turnkey scope, contract points and handover documents. Whatever the model, the handover file should include as-built drawings; in a licensed dental facility, later alterations are applied for with the licence and revised drawings.
Which firms provide healthcare interior design services?
Firms providing healthcare interior design services fall into three broad types: specialist healthcare design offices, general interior design firms and fit-out contractors. They differ in licensing and services coordination experience, in their role on site, and in whether the design is checked independently.
| Type of firm | Typical scope | Strength | Limit |
|---|---|---|---|
| Specialist healthcare design office | From the brief to construction drawings; site supervision or turnkey if agreed | Regulatory dimensions, licensing drawings and equipment coordination are daily work | Site services in distant cities need separate planning |
| General interior design firm | Concept, construction drawings, materials and furniture | Broad design and detailing experience | May need extra advice on health regulations and medical services |
| Fit-out contractor | Building works, services and joinery; sometimes design too | One point of contact; time and cost managed by one party | Independent checking needs a separate supervisor, as in any turnkey model; starting without drawings leaves the scope unclear |
This is not a quality ranking. A general interior design firm may be enough to refurbish a small practice. A polyclinic that needs a pre-approval calls for a team that knows licensing drawings and medical services coordination.
In Picco Architecture's project archive, 131 of 156 records, about 84%, are in the healthcare category.
What services does Picco Architecture provide on clinic projects?
Picco Architecture's services on clinic projects fall under six headings: architectural design, interior design, technical design and construction drawings, design budgeting, site supervision and turnkey delivery. As of November 2026, the healthcare category of its archive holds 131 projects, including a dental depot, a laboratory and a beauty centre. In 99 of them the scope goes beyond drawings: 41 are design and site supervision and 58 turnkey delivery.
- 131projects in the healthcare category, 2015–2026
- 21provinces in Türkiye
- 5countries abroad
- 99projects with site supervision or turnkey delivery
- 400 m²median recorded area
Scope changes with project size. Of the 24 projects between 600 and 999 m², 16 have a turnkey scope; of the 28 between 150 and 299 m², 7 do. Design only has its largest share in projects under 150 m²: 7 of 17.
- Design only
- Design and site supervision
- Turnkey
Show the data as a table
| Project area | Design only | Design and site supervision | Turnkey |
|---|---|---|---|
| Under 150 m² | 7 | 4 | 6 |
| 150–299 m² | 8 | 13 | 7 |
| 300–599 m² | 11 | 12 | 22 |
| 600–999 m² | 3 | 5 | 16 |
| 1,000 m² and over | 3 | 7 | 7 |
The median recorded area also grows with the scope: 311 m² for design only, 390 m² for design and site supervision, and 450 m² for turnkey. In our view, larger projects bring more work packages and contractors, so a single point of contact is sought more often.
The 5 healthcare projects abroad (one each in Bishkek, Najaf, London, Baku and Iran) have a design-only or design and site supervision scope; all turnkey projects are in Türkiye. The 1,100 m², 8-unit Dental Excellence Oral and Dental Health Polyclinic in Antalya is recorded as turnkey. More work is on our healthcare projects page.
Let’s discuss your clinic project.
Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.
On-site surveys of existing premises are free of charge.
Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50
We have received your project enquiry.
Our team will review the information you shared and get in touch with you.
Frequently asked questions
Which interior design services does refurbishing an existing clinic need?
Work on an existing clinic starts with a survey checked against the licence drawings. In a licensed dental facility in Türkiye, the licensed physical areas cannot change without the health directorate's permission, and major alterations need municipality-approved revised drawings. The survey, a change plan and revised drawings therefore come before new schedules.
Is a layout plan alone enough for a clinic?
A layout plan shows room arrangement and sizes, but it is not enough to build from. Contractors also need ceiling and floor plans, dimensioned service outlets, details and a finishes schedule. In our view, work started from a layout alone gets decided on site, making cost and time hard to predict.
Can the equipment supplier's plan replace the interior design project?
No; the supplier's plan is an input. The maker of a dental unit, X-ray or suction plant supplies installation dimensions and connection requirements. ISO 10637, the standard for central dental suction equipment, requires installation, use and maintenance information from the manufacturer. Room arrangement, licensing drawings, materials and lighting are resolved in the interior design project.
Which documents are handed over at the end of the interior design service?
Under the Chamber of Interior Architects' drawing standard, each stage's documents go to the client, and changes requested during approval are entered on the final originals. A clinic's handover file should also hold as-built drawings, finishes and furniture schedules, the equipment layout plan and warranties. It is the basis for later alterations and licence procedures.
When should clinic interior design services start?
In our view, the best time is before signing a lease or purchase. An initial review and a rough layout show whether the space fits the target number of rooms or dental units. Türkiye's dental facilities regulation bars investment before a required pre-approval, so licensing drawings go first in the programme.
Defining clinic interior design services in writing, by stage and deliverable, makes quotations easier to compare. To discuss which stages your clinic's facility type and target capacity require, get in touch with us.