Skip to content
Discuss Your Project
  1. Home
  2. Blog
  3. Dental office floor plans: zones, flow and area by number of units

Dental office floor plans: zones, flow and area by number of units

14 min read

We build dental office floor plans from four zones: reception, treatment, sterilisation and technical support, and staff. In 107 Picco Architecture projects with 2–8 units, median total area grows about 90 m² per extra unit. A rough estimate is 115 m² + (units − 2) × 90 m². Turkish regulation sets a 12 m² minimum treatment room with one unit at most. We recommend sterilisation close to the treatment rooms; Henry Schein suggests within about 9 m of each.

Which zones make up dental office floor plans?

In our view, dental office floor plans consist of four zones: patient reception, treatment, support and staff. Patients move from the entrance to the waiting room and a treatment room within their own zone; support and staff areas stay off this route. Turkish regulation draws no zone boundaries for polyclinics; it defines rooms and some minimum sizes. A centre's general anaesthesia unit, however, has defined sterile and semi-sterile areas.

ZoneMain spacesRequirement in Türkiye (polyclinic)Position in the plan
Patient receptionEntrance, reception desk, waiting room, toiletsWaiting room of at least 15 m² for 2 units, plus 5 m² per extra unit; at least two toilets for patients and staff, separate for women and men, one accessible (Art. 9/1-b, 9/1-ç)Next to the entrance, at the head of the treatment corridor
TreatmentTreatment rooms, dental radiology unit, optional consultation roomEach unit in a separate room of at least 12 m²; dental radiology unit mandatory (Art. 8/1-a, 9/1-a, 9/1-e)Between the waiting room and the support zone
SupportSterilisation, clean store, plant room for compressor and vacuumDisinfection and sterilisation conditions must be met; no separate room defined for polyclinics (Art. 19/6)Close to the treatment rooms, off the patient route where possible
StaffChanging area, rest room, dentist and management officeChanging areas and a rest room of sufficient number and size (Art. 9/1-c)On a rear corridor, separate from patient areas
Zones of a dental polyclinic floor plan in Türkiye, the regulatory requirements and recommended positions, as of November 2026. Source: Ministry of Health of Türkiye, Regulation on Private Health Institutions Providing Oral and Dental Health Services, 2022 (last amended 15.12.2024); positions are Picco Architecture's recommendation.

Dental equipment distributor Henry Schein's planning guide splits a practice into three zones: one for patients, one for treatment and one for staff. In our view, sterilisation and the plant room deserve a zone of their own. Their position sets the arrangement of treatment rooms and the route of soiled instruments.

The table covers polyclinics. An oral and dental health centre in Türkiye also needs a general anaesthesia unit and an observation unit. It either sets up central sterilisation or buys the service in. These units form a separate zone in the plan. Check the current rules with the provincial health directorate before applying.

How does area per unit differ by facility type?

Total area per unit rises from dental practices to centres. Picco Architecture's medians are about 60 m² in dental practices (muayenehane), 80 m² in polyclinics and 93 m² in oral and dental health centres. Turkish regulation sets no total area per unit. We gave the overall median of 124 projects (78 m²) in our article on the cost of opening a dental clinic.

Total clinic area per dental unit: two US rules of thumb and the median in Picco projects by facility type. The US values are 400 ft² and 12 m² ÷ 0.275, rounded. Source: Henry Schein, Office Design and Floor Plan; American Dental Association, Determining the ideal size and space of your practice; Picco Architecture project archive, November 2026
Show the data as a table
BenchmarkTotal area per dental unit (m²)
Henry Schein guide, United States (400 ft²)37
ADA formula with a 12 m² room44
Picco, dental practice (muayenehane, 18 projects)60
Picco, polyclinic (97 projects)80
Picco, oral and dental health centre (6 projects)93

Total area per unit is the clinic's total area divided by its number of units, so waiting, sterilisation, staff rooms and corridors all count. The figure therefore reflects the service programme more than room size.

Two common US rules of thumb give smaller figures. Henry Schein puts the typical allowance at about 400 ft² (37 m²) for each chair. The American Dental Association (ADA) total-area formula gives about 44 m² per unit with a 12 m² room. Even Picco's practice median is above these; the polyclinic median is roughly 1.8 to 2.2 times them.

In our view, regulation explains part of the gap. In Türkiye each unit stands in a separate room. A polyclinic must also provide a radiology unit, two toilets, a changing area and a rest room. Since the records do not state gross or net areas, the comparison shows a direction, not a measurement.

How many square metres does a clinic with a given number of units need?

In Picco Architecture projects, the median total area is 118 m² for 2 units, 400 m² for 5 units and 652 m² for 8 units. Between 2 and 8 units, median total area grows by about 90 m² for each additional unit. Projects with equal unit counts vary widely; the table shows the middle half.

Total clinic area by number of dental units: the range of the middle half of Picco projects (lower and upper quartile). Source: Picco Architecture project archive, November 2026 (107 dental projects with 2–8 units)
Show the data as a table
Number of unitsLower quartile (m²)Upper quartile (m²)
2 units (17 projects)90135
3 units (14 projects)176231
4 units (17 projects)258431
5 units (22 projects)338528
6 units (17 projects)395665
7 units (6 projects)471765
8 units (14 projects)575800

Multiplying the target number of units by a single average per unit overstates small clinics and understates large ones. Area per unit grows with clinic size, so a line fitted to the median areas estimates scale better.

Total area ≈ 115 m² + (Number of units − 2) × 90 m²

VariableMeaning
115 m²Value of the line at 2 units; the median of Picco's 2-unit projects is 118 m²
Number of unitsBetween 2 and 8; not used for larger clinics because data are scarce
90 m²Increase in the median total area per additional unit (slope of the fitted line)

Example: for a 6-unit polyclinic, 115 + 4 × 90 = 475 m². In Picco's 17 projects with 6 units, the median is 460 m² and the middle half is 395–665 m².

A method for estimating total clinic area from the number of units. The line was fitted by least squares to the median areas by number of units in Picco's 2–8 unit projects. Source: Picco Architecture project archive, November 2026

The roughly 90 m² that separates one unit count from the next is far more than a room. In a Turkish polyclinic, regulation measures 17 m² per extra unit: a 12 m² room plus 5 m² of waiting room. In our view, the rest is sterilisation capacity, storage, staff areas, corridors and walls.

For centres, Turkish regulation adds at least 25 m² to the 500 m² minimum for each unit above five. The 90 m² increase in Picco data is about 3.6 times that. The formula is a scale check, not a licensing requirement. We covered the room programme of 1–3 unit practices in our article on small dental office design.

How are clean and dirty areas separated in the plan?

Clean and dirty areas are separated by two routes: used instruments go from the treatment room to sterilisation, and clean instruments come back by another. The World Health Organization (WHO) treats a dedicated decontamination area as essential in a dental practice and asks for a dirty-to-clean flow. In Türkiye, only centres and hospitals need a central sterilisation unit, and a centre may buy the service in.

The WHO's 2016 manual on reprocessing medical devices asks a sterile services department (SSD) to separate dirty and clean areas physically, with one-way workflow. In special units such as dental clinics, it recommends demarcating the two where possible. It also prefers, where possible, that dental instruments be processed in an SSD.

The US Centers for Disease Control and Prevention (CDC) also wants all instruments processed in one designated central area. It prefers physical barriers between the stages. Without them, distance may suffice if processing staff are trained to keep clean areas uncontaminated. Its 2003 guidelines add that the space should suit the expected workload and stored items.

Turkish regulation builds this flow into a centre's sterilisation unit. Only materials pass between preparation and the sterile store; a pass-through autoclave divides the two, while a single-door autoclave stays in the preparation area. Our article on the requirements to open a dental clinic covers the unit's sections and the option to buy the service in.

Distance to the treatment rooms decides where sterilisation goes. Henry Schein recommends that no treatment room be more than 30 ft (about 9 m) from sterilisation. Instruments should move through it in a straight line from dirty to clean. We test floor plans with these questions:

  1. Is sterilisation within about 9 m walking distance of every treatment room?
  2. Are the dirty entry and clean exit in different places, with a one-way flow?
  3. Can used instruments reach sterilisation without passing the waiting room and reception desk?
  4. Is the sterilisation area out of sight of the waiting room?
  5. Does the sterile store open onto the treatment corridor from the clean side?

How should patient and staff circulation work?

Patient and staff circulation uses separate routes wherever possible. Patients go from the entrance to the waiting and treatment rooms; staff reach sterilisation, storage and the rest room their own way. The dental clinic criteria of the US Department of Veterans Affairs (VA) call for separate patient and staff paths where possible.

Under the VA criteria, staff rest, changing and toilet rooms sit close to where staff work, yet apart from the spaces patients use. Reception should have a view of the waiting area, with audio privacy at registration. Treatment rooms for short, frequent visits can sit near the front of the clinical area.

In our view, a single corridor is usually enough for clinics of up to six units. Treatment rooms line both sides and sterilisation sits in the middle. Larger clinics can consider a two-corridor layout: a patient corridor at the front and a sterilisation and staff corridor at the back. Only this layout fully separates sterilisation from the patient route.

CorridorMinimum widthBasis
Halls and corridors, general rule (Türkiye)1.20 mPlanned Areas Zoning Regulation, Art. 29/3
Central corridor used for waiting in a centre (Türkiye)3 mDental health institutions regulation, Art. 10/1-b
General anaesthesia unit corridor in a centre (Türkiye)2 mDental health institutions regulation, Art. 10/1-c
Main corridor, VA dental clinic (US)8 ft (2.44 m) clearVA PG-18-9, Chapter 222
Non-patient corridor, VA (US)6 ft (1.83 m) clearVA PG-18-9, Chapter 222
Minimum corridor widths for dental clinics in Türkiye compared with a US public standard, as of November 2026. Source: Planned Areas Zoning Regulation (Türkiye); Regulation on Private Health Institutions Providing Oral and Dental Health Services; U.S. Department of Veterans Affairs, PG-18-9 Space Planning Criteria, Chapter 222: Dental Service, 2022

The Turkish 1.20 m is a lower limit. In our view, corridors need more width where wheelchairs pass and doors open outwards. Toilet doors must open outwards or slide under Turkish regulation, and should not narrow the corridor when open. Istanbul, Izmir and some other metropolitan cities have their own zoning regulations; check widths against the one that applies.

The VA converts the net room area of a dental clinic programme to department gross area with a factor of 1.55. So about 35% of the department area lies outside net room areas; in our view, this is mostly walls and internal circulation. A further factor of 1.35 applies at building level for the envelope, main corridors, stairs, lifts and shafts.

How is area per unit spread across Picco Architecture's dental projects?

In 71 of Picco Architecture's 124 dental projects with a recorded number of units, total area per unit is between 60 and 100 m². It is below 60 m² in 24 projects and above 100 m² in 29. The tightest plan has about 33 m² per unit and the most generous has 250 m².

The archive's most common size is 5 units (22 projects). Sizes of 2, 4 and 6 units have 17 projects each, 3 and 8 units 14 each, and 15 projects have 10 or more. The records do not say whether areas are gross or net.

Even same-year projects differ widely. The Dental Excellence Oral and Dental Health Polyclinic in Antalya is recorded for 2026 with 8 units and 1,100 m², about 138 m² per unit. That year Pia Dental in Hatay has 5 units and 425 m², or 85 m² per unit. Dental Angels in Bishkek has 3 units and 190 m², about 63 m² per unit.

In our view, the gap shows that building shape and service programme drive the plan, even at the same number of units. With no room lists in the records, this is an interpretation. See more of our work on the healthcare projects page.

Let’s discuss your dental clinic.

Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.

On-site surveys of existing premises are free of charge.

Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50

Type of facility
Do you have premises?
Contact Details
How did you hear about us? (Optional)

Please confirm that you have read the privacy notice to continue.

Frequently asked questions

How many dental chairs fit in 300 m²?

In Picco Architecture projects, 300 m² matches the median area of 4-unit clinics. Of 17 four-unit projects, 9 measure 300 m² or less, as do 5 of 22 five-unit projects; the smallest five-unit clinic is 220 m². In our view, 4 units are realistic in 300 m², and 5 fit only in a tight plan. Building shape, service shafts and the waiting, toilet and staff areas required by regulation decide the exact number.

Can a dental clinic in Türkiye have an open-bay treatment area?

Turkish regulation allows at most one dental unit per treatment room. Treatment rooms in polyclinics and centres must meet the same standard (Art. 8/1-a, 9/1-a, 10/1-a). As a rule, an open bay with several chairs in one room therefore cannot be licensed as of November 2026. In our view, separate rooms with glazed partitions keep a sense of openness. Confirm the current rule with the provincial health directorate.

Where should the X-ray room go in the plan?

Polyclinics and centres in Türkiye must have a dental radiology unit, and the device needs a Nuclear Regulatory Authority licence. VA criteria take intraoral X-rays in the treatment rooms and give a separate room only to panoramic and cone-beam devices. The same criteria ask for shielding to be calculated by a radiation physicist at the design stage. In our view, the room belongs near the treatment rooms, on the patient side, fixed in the first draft.

Can a dental polyclinic in Türkiye be spread over several floors?

Yes. Under Turkish regulation, a polyclinic on more than one floor must have toilets on every second floor. A wheelchair-capable lift is required if the polyclinic is not on the ground floor or cannot offer accessible services there. Where there is no lift, a stair lift or a lifting platform may be used.

What should a plan leave for adding units later?

A new unit needs its own room, service connections and 5 m² more in the waiting room. In our view, the first plan should keep a spare or storage room with services run to it. Under Turkish regulation, the spaces on which the licence is based cannot change without the directorate's permission, so adding a unit later requires an application.

Starting a dental office floor plan from the number of units, the zones and the sterilisation position reduces the risk of choosing the wrong premises. To review a plan for your units and premises, contact us.