Skip to content
Discuss Your Project
  1. Home
  2. Blog
  3. Small dental office design: how many m², which rooms, which finishes?

Small dental office design: how many m², which rooms, which finishes?

14 min read

Small dental office design starts with dimensions. Under Turkish regulation, each dental unit needs its own treatment room of at least 12 m², and the waiting room at least 10 m². One dentist may operate no more than two units. Across 17 Picco Architecture practices with 1–3 units, total floor area ranged from 86 to 200 m², with a median of 120 m². Treatment rooms use easy-to-clean surfaces rather than carpet or fabric upholstery.

How many square metres does a small dental practice need?

Turkish regulation sets no minimum total area for a dental practice; it sizes individual rooms instead. The minimum treatment room and waiting room areas add up to 22 m² for one unit and 39 m² for two. In 13 two-unit practices designed by Picco Architecture, total area was about three times that: 86 to 165 m², with a median of 110 m².

  • Rooms sized by the regulation (m²)
  • Median area in Picco projects (m²)
Regulatory minimum for treatment rooms plus waiting room, compared with the median recorded total area of Picco's dental practice projects, by number of units. The one-unit group is a single project (160 m²); the value is that project's area, not a median. Source: Ministry of Health of Türkiye, Regulation on Private Health Facilities Providing Oral and Dental Health Services, Article 8; Picco Architecture project archive, November 2026
Show the data as a table
Number of unitsRooms sized by the regulation (m²)Median area in Picco projects (m²)
1 unit (1 project)22160
2 units (13 projects)39110
3 units (3 projects)56184

The regulated area has three parts: 12 m² per treatment room, 10 m² of waiting room, and 5 m² more waiting space per additional room. A toilet is mandatory, but the regulation gives it no size. Sterilisation, the reception desk, storage, plant space and circulation have no prescribed size either, and they make up most of the total.

Of Picco's 13 two-unit practices, 11 measure between 90 and 130 m². The median area per unit in these projects is 55 m². The records do not state whether areas are gross or net; check the basis of any listing or title deed.

The American Dental Association (ADA) offers a simple formula that estimates total area from the treatment rooms. Its divisor of 0.275 means that treatment rooms make up 27.5% of the total. Testing a property against it before choosing finishes rules out unsuitable spaces early.

Total area ≈ Number of units × Treatment room area ÷ 0.275

VariableMeaning
Number of units1–3 in this article; no more than 2 per dentist
Treatment room areaAt least 12 m² in Türkiye; one unit per room at most
0.275Assumed share of treatment rooms in the total area

Example: 2 × 12 m² ÷ 0.275 ≈ 87 m². With 15 m² rooms, 2 × 15 m² ÷ 0.275 ≈ 109 m². Picco's two-unit practices have a median of 110 m².

A method for estimating total practice area from the number and size of treatment rooms. Source: American Dental Association, Determining the ideal size and space of your practice; worked example by Picco Architecture.

The result is a starting point, not a licensing requirement. The smallest two-unit practice in Picco's archive is 86 m², very close to what the formula gives for two 12 m² rooms. We cover how floor area drives the budget in our article on the cost of opening a dental practice.

Which rooms are mandatory in a one- or two-chair practice?

Turkish regulation requires three spaces in a dental practice. These are a treatment room of at least 12 m² with a basin, a waiting room of at least 10 m² and a toilet with a basin. It does not define a separate sterilisation room, but every facility must meet disinfection and sterilisation requirements. A radiology unit and a staff room are not mandatory in a practice.

SpaceRegulatory requirementDesign note
Treatment roomMandatory; at least 12 m², one unit at most, washbasin and basic equipment; patient privacy protected in terms of sound, sight and noise (Art. 8/1-a, 8/1-c)The unit's service outlets and the dentist's working side shape the room
Waiting roomMandatory; at least 10 m², plus 5 m² per additional treatment room; may double as the reception area (Art. 8/1-b)The reception desk takes part of this area; seating gets the rest
ToiletMandatory; with washbasin and hygienic; door opens outwards or slides (Art. 8/1-ç)Door swing can change the plan in narrow corridors
SterilisationNo separate room defined; disinfection and sterilisation requirements must be met (Art. 19/6)Dirty and clean items kept apart; placed close to treatment rooms
X-rayNo radiology unit required in a practice; if a device is installed, a Nuclear Regulatory Authority licence is mandatory (Art. 21/2)If a device is planned, its position is fixed in the first draft
Staff roomNot required in a practice; changing area and rest room mandatory in a polyclinic (Art. 9/1-c)A small niche can hold staff lockers
Observation or recovery roomNot required; treatment under sedation or general anaesthesia is not allowed in a practice (Art. 8/1-d)The space can go to treatment or storage
Door signsA sign on each room and unit door stating its purpose (Art. 7/5)Sign style is designed with the facade sign and interior graphics
Spaces in a 1–3 unit dental practice and the regulatory requirements in Türkiye, as of November 2026. Source: Ministry of Health of Türkiye, Regulation on Private Health Facilities Providing Oral and Dental Health Services, 2022 (last amended 15.12.2024); design notes by Picco Architecture.

A single dentist cannot run a three-unit practice, because the regulation allows no more than two units per dentist. A third unit needs a second dentist. Several dentists may share a practice in one flat if each has a separate treatment room; each needs a separate licence.

Our article on requirements to open a dental clinic in Türkiye compares practices with polyclinics and centres and sets out the licensing steps. Confirm the current rules with the provincial health directorate before applying.

How should a small dental practice be laid out?

A small practice works in three zones: waiting, reception and toilet by the entrance; treatment rooms in the middle; sterilisation and plant at the back. The aim is for patients to reach the treatment room without passing sterilisation or technical areas. This is not a regulatory rule but a planning principle we apply in small practices.

The US Centers for Disease Control and Prevention (CDC) splits instrument processing into four sections: receiving, cleaning and decontamination; preparation and packaging; sterilisation; and storage. Where possible, the CDC prefers a wall or partition between these sections. In a two-unit practice, the four sections can run along a single worktop from dirty to clean.

In our view, the treatment room door should not face the waiting room directly. Turkish regulation requires patient privacy in the treatment room in terms of sound, sight and noise. Opening the door onto a short corridor, or angling it, takes the patient in the chair out of the waiting room's line of sight.

Equipment choices can also free up floor space. An ADA design competition gave an honourable mention to a two-operatory practice of about 1,000 ft² (about 93 m²) in its small new build-out category. Because space was tight, the compressors and vacuum were placed vertically and the wiring was planned through the walls. The walls were soundproofed, and ceiling heights separated the two parts of reception.

The positions of units, compressor and vacuum should be fixed before the floor finish goes down. ISO 7494-2 sets requirements for a unit's air, water, suction and wastewater systems; the unit also needs a power supply. Because of their noise, we recommend a ventilated room for the compressor and vacuum, away from treatment and waiting rooms.

How can a small dental practice feel more spacious?

In our view, three decisions make a small dental practice feel spacious: sufficient, even light; surface reflectance; and a short list of materials. Lighting manufacturer Trilux, citing EN 12464-1, gives reflectances of 0.7–0.9 for ceilings, 0.5–0.8 for walls and 0.2–0.4 for floors. The page does not state the edition.

Reflectance is the share of incident light a surface reflects; a wall with a reflectance of 0.8 returns about 80%. Light ceilings and walls therefore return more light from the same luminaires. A dark wall may look attractive, but the same light level may then need more or stronger luminaires.

The amount of light is a measurable decision too. A 2025 study by Hıdır and Uygun cites values from the standard's 2011 edition. Waiting areas need at least 200 lux and 0.40 uniformity; treatment areas need at least 500 lux and 0.60. The standard was revised in 2021 as EN 12464-1:2021, so confirm current values with your lighting designer. Uniformity is the ratio of the lowest light level in an area to the average.

Turkish regulation only requires spaces to be lit "sufficiently" and gives no numerical value. In the same study, the lighting of four private dental clinics in Türkiye was simulated in DIALux. None of the four clinics met the standard values in both the waiting and the treatment area. Choosing luminaires on looks alone is a risk.

The more materials a small space has, the more fragmented it looks. In our view, one floor finish across waiting, corridor and reception, with a palette of two or three colours, is enough. If the treatment room wall facing the waiting room is glazed, we recommend frosting or filming the glass at eye level for visual privacy.

On colour, the ADA's guidance on colour schemes favours calm combinations. It notes that red may add to tension in a dental office, and that yellow can feel tense in large, bright expanses. It suggests using orange, pink and purple with restraint. Blue and green tend to relax but can look dull on their own, while bold schemes may suit staff areas.

Which finishes work in small dental office design?

In small dental office design, surfaces in treatment and sterilisation areas are chosen for cleaning and disinfection. Turkish regulation requires the floors of all units providing health services to be covered with a material that is easy to clean and disinfect. The CDC also advises against carpeting and cloth-upholstered furniture in treatment rooms, laboratories and instrument processing areas.

Surface or elementRequirementBasis
Floor, treatment and sterilisation areasEasy to clean and disinfect (regulation); avoid carpet (CDC)Turkish regulation Art. 7/2; CDC 2003, Category II
Seating, treatment roomWipeable surfaces instead of fabric upholsteryCDC 2003, Category II
Floors, walls and sinks (housekeeping surfaces)Cleaned routinely with detergent and water, and when visibly soiledCDC 2003, Category IB
Clinical contact surfaces (light handles, switches, door handles)Surface barriers where hard to clean; barriers changed between patientsCDC 2003, Category II
Ceiling, wall and floor colourReflectance: ceiling 0.7–0.9; walls 0.5–0.8; floor 0.2–0.4EN 12464-1 (as cited by Trilux; edition not stated)
General lightingAt least 200 lx in waiting areas; at least 500 lx in treatment areasEN 12464-1:2011 (as cited by Hıdır and Uygun 2025; standard revised in 2021)
Surface, colour and lighting requirements for a dental practice and their basis. The regulation applies as of November 2026; lighting values come from the editions cited by the sources. Source: Ministry of Health of Türkiye regulation, Article 7; CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003; Trilux, reflectances under EN 12464-1; Hıdır and Uygun, Journal of Architectural Sciences and Applications, 2025

The CDC's 2003 guideline is a US document, not binding in Türkiye. According to the guideline, carpet is harder to keep clean than a sealed hard floor and offers no dependable way to disinfect it. Category II marks recommendations "suggested for implementation" and backed by suggestive clinical or epidemiologic studies or a theoretical rationale.

A clinical contact surface can be contaminated directly by patient material or gloved hands, such as a light handle, switch or door handle. Housekeeping surfaces such as floors, walls and sinks pose little risk of spreading disease. Fewer handles, switches and open shelves mean fewer points to clean or cover after each patient.

The CDC's advice against carpet and cloth upholstery does not list the waiting room. Even so, the waiting room is combined with reception, so wipeable surfaces at frequently touched points make cleaning easier. In our view, the same test applies to cabinets, worktops and fronts: fewer joints and handles mean shorter cleaning.

How many dental practices has Picco Architecture designed?

As of November 2026, Picco Architecture's project archive includes 19 oral and dental health practices in Türkiye. The projects span 2015–2026 and six provinces: 12 in Antalya, two each in Ankara and Aydın, and one each in Istanbul, Tekirdağ and Denizli. Of the 18 practices with a recorded unit count, 17 have 1–3 units, and 13 of these have two.

In these 17 projects, total area ranges from 86 to 200 m², with a median of 120 m². Of the 19 projects, 9 were design only, 5 were design with site supervision and 5 were turnkey. The largest practice in the archive is a 2025 project in Manavgat with 5 units and 380 m².

The archive's single one-unit project measures 160 m², more than the two-unit median of 110 m²; one record does not support a general conclusion. In our view, practices usually occupy an existing unit in a building, so the building's size may set the area more than the unit count. The records do not include building type, so this is an interpretation.

One example is the Deniz Tayfun Oral and Dental Health Practice in Antalya, recorded as a 2024 two-unit project of 130 m². We answer design questions about polyclinics and larger clinics on our clinic design FAQ page. For other work, see our healthcare projects.

Let’s discuss your dental clinic.

Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.

On-site surveys of existing premises are free of charge.

Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50

Type of facility
Do you have premises?
Contact Details
How did you hear about us? (Optional)

Please confirm that you have read the privacy notice to continue.

Frequently asked questions

Can a single dentist open a three-chair practice in Türkiye?

No. The regulation allows no more than two units per dentist, provided each unit is in a separate treatment room. A third unit needs a second dentist. Two dentists may share a practice in the same flat if each has a separate treatment room, and each receives a separate licence. For more units, consider a polyclinic.

How many people should a practice waiting room hold?

The regulation sets area, not capacity. The waiting room must be at least 10 m² for one treatment room, 15 m² for two and 20 m² for three. Because the waiting room may also serve as the reception area, the desk takes part of this space. Appointment intervals and the number of companions decide the seat count; agree on these with the dentist before design starts.

Can fabric chairs be used in the waiting room?

The CDC's advice against carpet and fabric upholstery covers treatment rooms, laboratories and instrument processing areas; the waiting room is not on that list. Turkish regulation's general physical requirements ask for easy-to-clean floors and do not address upholstery separately. In our view, wipeable upholstery or washable covers make daily cleaning easier in the waiting room as well.

Can a treatment room have a glass partition?

The regulation's physical requirements do not address glass partitions separately; they require privacy in the treatment room in terms of sound, sight and noise. In our view, the glass should therefore be frosted or filmed at eye level, with joints that do not leak sound. Glass brings daylight deeper into a small practice and makes it feel larger. Check the acoustic rating against the glass manufacturer's test certificate.

Can a practice's interior be changed after licensing?

Under the regulation, the physical spaces on which the licence is based cannot be changed without the provincial health directorate's permission. A renovation that moves, resizes or adds rooms therefore depends on that permission. In our view, repainting or replacing furniture does not change the physical spaces. If in doubt, consult the directorate before starting any change.

Starting small dental office design from the unit count, room list and layout, rather than materials, is the first step to using the space well. To review your practice plan and finishes together, get in touch with us.