Skip to content
Discuss Your Project
  1. Home
  2. Blog
  3. Dental clinic design and clinic interior design: common questions

Dental clinic design and clinic interior design: common questions

Updated: 12 min read

Dental clinic design resolves, in one floor plan, the facility type's regulatory rules, patient and sterilisation flows, building services and licence drawings. In Turkey a treatment room needs a floor area of 12 m² or more and may contain only one dental unit. The enclosed area of an oral and dental health centre cannot fall below 500 m². In Picco Architecture's 124 dental projects with a recorded unit count, the median area per unit is 78 m².

Where does dental clinic design start, and what does the facility type change?

Dental clinic design starts with choosing the facility type. Turkey recognises four: the dental practice and the polyclinic, plus the oral and dental health centre and the dental hospital. Each type has its own minimum area, pre-approval rule, licensing authority and mandatory units. Leasing premises before the type is settled can mean redrawing the plan from scratch.

Rule or dataPracticePolyclinicCentre (oral and dental health)Dental hospital
Lower limit on enclosed areaNoneNone500 m²; above 5 units, 500 + (units − 5) × 25 m²1,000 m²; above 15 units, 1,000 + (units − 15) × 25 m²
Treatment roomOne unit, at least 12 m²; up to 2 units per dentistPractice standard, at least 2 roomsPractice standard; no fewer rooms than the minimum number of dentistsPractice standard; no fewer rooms than the minimum number of dentists
Pre-approvalNoYes, 1-year validityYes, 2-year validityYes, 2-year validity
Licensing authorityProvincial governor's officeProvincial governor's officeMinistry of HealthMinistry of Health
Total of administrative steps with a deadline30 working days45 working days75 working days75 working days
Picco projects (Turkey)199661
Median units (Picco)2511.517, one project
Median area (Picco)122 m²450 m²1,110 m²1,800 m², one project
Rules that constrain dental clinic design in Turkey's four facility types, with medians from Picco Architecture's dental projects in Turkey, November 2026; the timing row adds the deadlines written for pre-approval, the site inspection and the operating permit, assuming a complete file. Source: Ministry of Health, Regulation on Private Healthcare Facilities Providing Oral and Dental Health Services, 2022 (last amended 15.12.2024); Picco Architecture project archive, November 2026

That total is not an official ceiling. The regulation sets no deadline for issuing the licence itself. Design and construction, correspondence over missing papers and the X-ray licence also sit outside it. The room standard is identical across the four types, because the polyclinic, centre and hospital articles refer back to the practice article.

Real clinics are much larger than the rooms the regulation sizes. In a five-unit polyclinic those rooms come to 90 m²: 60 m² of treatment rooms and a 30 m² waiting area. Picco's 22 five-unit dental projects, by contrast, have a median area of 400 m². In our view most of the difference is corridors and circulation, plus sterilisation, radiology, staff rooms, toilets, storage and plant space.

Which interior design firms do you recommend for clinic design?

We answer this with a list of criteria rather than a firm's name. Look for finished clinics of a similar specialty and size, experience of licence files, a written commitment on who runs the site and chamber registration. Picco Architecture is one practice that can be judged on that list. Our archive holds 131 projects in the healthcare category from 2015 to 2026, 58 of them turnkey.

Turkey's Regulation on Freelance Interior Architecture Services, Registration and Professional Supervision sets a firm rule. Without the annually renewed office registration certificate, an interior architect may not offer freelance services, save for listed exceptions. So ask early for membership of the Chamber of Interior Architects of TMMOB (Union of Chambers of Turkish Engineers and Architects). Ask for this year's certificate too. In our view both are pass-or-fail checks before any scoring.

Once registration is confirmed, five criteria are compared: specialty experience, scale, licensing, the delivery team and the contract. Weighting each criterion and scoring the proposals gives a sounder basis for a decision than a firm's reputation. Our guide on how to choose a clinic interior designer shows which document proves which criterion, with a two-practice scoring example.

Where can I find the best interior designers for a clinic?

Three sources build the shortlist: dentists at clinics you like, practices' project pages and service platforms. The professional chamber does not add names; it is where you check a candidate's registration. In our view the most valuable step before deciding is seeing a clinic the practice delivered while it is treating patients.

  • Dentists. Ask directly who designed the clinic, whether the timetable held and whether the licensing commission asked for changes.
  • Project pages. Practices that give each job's type, city, year and area make it easier to pick examples close to your own clinic.
  • Platforms. Useful for gathering names quickly; we do not read a platform's ranking as evidence of experience on its own.
  • The chamber. Request the registration number and a current certificate; if unsure, ask the local branch to confirm.

A shortlist of three practices is often enough. For a fair comparison, give all of them the same dental clinic design brief: facility type, approximate area, number of units and target opening date. Our guide to choosing a clinic interior designer covers these channels and the checks in more detail.

Which interior design services matter most in clinic projects?

Four documents that feed both the licence file and the site carry the most weight in a clinic project. They are a measured survey and a brief written for the facility type. Then come a floor plan matching the licence drawings' dimensions and construction drawings that locate every services point. Material choices, the budget and site supervision progress well once these are fixed.

  1. Preparation: the survey and a brief that counts rooms, units, staff and equipment.
  2. Design: concept and layout, drawings for the licence file, construction sheets, equipment and services coordination.
  3. Schedules: room schedule, material and colour schedule, furniture and luminaire schedules, technical specification, quantities.
  4. Delivery: design only, design plus site supervision, or turnkey; at the end, as-built drawings and a handover file.

What these schedules contain is defined by the profession. In Turkey, the drawing and presentation standard was adopted by the TMMOB Chamber of Interior Architects in 2018. It counts the material and colour schedule, the room schedule and the technical specification of fittings as parts of the construction drawings. In a clinic, the same schedules are the shared basis for pricing and for checks at handover.

Where pre-approval applies, investment may not begin before it is granted. Dental clinic design therefore produces the sheets for the pre-approval and licence applications first. Engineers design the medical gas and electrical systems; gathering equipment, socket, gas and suction outlets on one coordination plan is usually the interior designer's task.

Our guide to clinic interior design services tabulates the drawings and documents delivered at each of nine stages.

What should you consider in clinic interior design?

Seven topics stand out, and the first decision is fit with the specialty. Then come flows of patients and materials, cleanable surfaces, privacy and acoustics, and the patient's sense of trust. Accessibility with fire safety, and sustainability, complete the list. The specialty comes first because the treatments offered fix the number and size of rooms, the equipment and the licence type from the outset.

Most of these topics can be tracked in numbers. Turkish regulation does not allow a dental treatment room below 12 m², and it holds a single unit. Health Building Note (HBN) 00-09, from the Department of Health in England, names good separation of clean and dirty work among its design principles. The same document rules out carpet in clinical areas.

In our view the most sensitive flow in dental clinic design is the path of used instruments to sterilisation and their clean return. According to the 2013 edition of HBN 00-09, there were at that time no definitive data that antimicrobial coatings and paints reduce healthcare-associated infections. In our view this makes cleanability and durability, not an antimicrobial label, the deciding test for surfaces.

Picco Architecture recommends planning lighting in two layers. Strong task light casts no shadow at the dental chair, while gentler general light serves the waiting area. Sound values for privacy and acoustics, and dimensions for accessibility and fire safety, are given with sources in our article on clinic interior design considerations.

Which firms offer interior design services for healthcare?

Three groups of firm take on interior design for healthcare buildings. They are practices specialising in healthcare, general firms that design every kind of space, and contractors that also draw the design. The groups differ in licence-drawing and medical-services experience and in their role on site. Picco Architecture is one of these firms: 131 of the 156 project records in its archive, about 84%, are in the healthcare category.

  • Specialist practice. Regulatory dimensions and licence sheets are routine; visit plans for sites in other cities should be agreed separately.
  • General interior design firm. Strong on detailing and materials; outside advice on health rules and medical gas may be needed.
  • Contractor. Programme and budget sit in one place; independent review of the design needs a separate supervisor.

These groups are not a league table. A general firm can handle the refresh of a one-room practice. For a polyclinic subject to pre-approval, dental clinic design calls for a team familiar with licence sheets. Our clinic interior design services guide compares the scope of each firm type in more detail.

  • 131projects: the archive's healthcare category, 2015 to 2026
  • 21provinces; the 126 projects in Turkey spread across them
  • 5countries abroad: Azerbaijan, Iran, Iraq, Kyrgyzstan, the United Kingdom
  • 58turnkey projects, all in Turkey
  • 400 m²median of recorded areas
Five figures from the healthcare category of Picco Architecture's archive: project count, provinces, countries, turnkey scope and median area. Source: Picco Architecture project archive, November 2026

Of the projects in Turkey, 61 are in Antalya; Istanbul has 18, Ankara 9 and Izmir 8. By scope, 58 were turnkey, 41 design plus site supervision and 32 design only. The smallest recorded area is 86 m² and the largest 3,000 m².

Picco Architecture's 131 projects in the healthcare category by facility type: 98 polyclinics (one in Bishkek, one in Najaf), 19 practices, 6 centres, 1 hospital, 4 other dental projects and 3 non-dental projects. Source: Picco Architecture project archive, November 2026
Show the data as a table
Facility typeShare (%)
Dental polyclinic74.8
Dental practice14.5
Oral and dental health centre and dental hospital5.3
Other dental projects: clinics in Iran and London, laboratory, depot3.1
Non-dental: hair transplant, aesthetics and beauty2.3

Outside dentistry, the archive lists a beauty centre and a hair transplant centre in Antalya and an aesthetic clinic in Baku. On clinic projects we fix the facility type and the room and equipment list first. Patient and dirty-material flows come next, with colour and materials last. Type, city, year and area for every project appear in four languages in our healthcare projects listing.

Let’s discuss your dental clinic.

Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.

On-site surveys of existing premises are free of charge.

Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50

Type of facility
Do you have premises?
Contact Details
How did you hear about us? (Optional)

Please confirm that you have read the privacy notice to continue.

Frequently asked questions

How many square metres does a dental clinic need?

Turkish regulation sets no overall area limit for a dental practice or polyclinic. The limit applies at room level: treatment rooms of at least 12 m², one unit each. An oral and dental health centre needs an enclosed area of at least 500 m², a dental hospital at least 1,000 m². In Picco Architecture's 124 dental projects with a recorded unit count, the median is 78 m² per unit, and 400 m² overall for five-unit projects.

How do you estimate the cost of opening a dental clinic?

Rather than one figure, three groups of items are costed separately: those that grow with area, with unit count and with facility type. To check scale, you can use the 2026 approximate unit construction costs communiqué of Turkey's Ministry of Environment, Urbanisation and Climate Change. It puts oral and dental health centres in group III-C and gives TRY 23,400 per square metre, VAT excluded, for new construction. That value does not replace a fit-out quotation. The items and a worked example are in our guide to dental clinic set-up costs.

What is needed for a dental clinic licence in Turkey?

Under Turkish regulation, every facility except a dental practice applies to the provincial health directorate for pre-approval before investing. When the investment is finished, the licence application goes in with the documents in Annex 2, and a commission inspects the clinic on site. X-ray equipment needs a Nuclear Regulatory Authority licence, and patients may be seen only after the operating permit. Our guide to the requirements to open a dental clinic lists the steps; confirm the current text with the provincial health directorate.

How long do dental clinic design and licensing take?

Add up the steps that Turkish regulation gives a deadline, assuming a complete file. A practice then takes 30 working days, a polyclinic 45 and a centre or hospital 75. Issuing the licence has no set deadline, and design, construction, correspondence over missing papers and the X-ray licence are excluded. Pre-approval lasts one year for a polyclinic and two for a centre or hospital. It can be extended once, by up to a year, if requested with reasons at least one month before expiry and the Ministry agrees.

Can a licensed dental clinic be renovated?

Yes, with permission. Under Turkish regulation, the physical areas the licence rests on cannot be altered without the provincial health directorate's consent. For major repairs and alterations, the directorate receives revised drawings approved by the municipality together with the licensed drawings. The directorate approves design changes for practices and polyclinics, the Ministry for centres and hospitals. A renovation therefore begins by checking a survey of the existing clinic against the licensed drawings.

Decisions in dental clinic design follow a fixed order: facility type, unit target, premises, floor plan and licence drawings. Completing that sequence before signing a lease lowers the risk of changing the plan later. You can browse completed examples on our healthcare projects page and discuss your clinic's type and timetable with the Picco Architecture team.