How to specify hotel furniture: sizes, materials and fire tests
Hotel furniture is furniture tested for commercial use that also meets the items a hotel's star rating requires. Four criteria drive the choice: the room programme and dimensions, durability under non-domestic use, ignition tests for upholstery and beds, and how easily it cleans. Under the Hotelstars Union criteria, a 5-star hotel needs beds at least 2.00 m long, with singles 0.90 m and doubles 1.80 m wide.
How does hotel furniture differ from domestic furniture?
Hotel furniture differs from domestic furniture in three ways: test standard, fire behaviour and intensity of use. Europe has separate standards for non-domestic seating, tables and storage. A hotel armchair is used by different guests every day, wiped down often and stays in the same room for years.
- Durability: a test report against a non-domestic standard, such as EN 16139 for chairs and sofas, EN 15372 for tables and EN 16121 for storage.
- Fire behaviour: ignition tests against a cigarette and a match flame for upholstered furniture and beds.
- Surface resistance: table tops tested against cold liquids, wet heat and dry heat (EN 12720, EN 12721, EN 12722).
- Fabric wear: the abrasion resistance of upholstery fabric, measured with the Martindale method.
- Consistency across the run: the same dimensions, colour and quality in hundreds of rooms.
Beds are the exception. EN 1725:2023 covers fully assembled beds for adults in both domestic and non-domestic settings, with test loads based on users of up to 110 kg. The standard does not cover flammability, so a bed's fire behaviour is documented through separate tests.
Non-domestic standards also have limits. EN 16139:2025 applies to non-domestic seating for adults weighing no more than 110 kg. Office work chairs, chairs for educational institutions and outdoor seating fall outside it; terraces and pool decks need their own standards.
What furniture should a hotel room have, and in what sizes?
In Türkiye, the Regulation on the Qualifications of Tourism Facilities sets the basic room furniture for every accommodation facility. It lists a bed meeting technical norms, a bedside table, a wardrobe, and sheer and heavy curtains. Hotels from 3 stars add a chair or armchair and a luggage rack; 5-star rooms add a seating group and a full-length mirror. The regulation gives no dimensions for furniture or beds.
| Item | Türkiye: regulation | Hotelstars Union 2025–2030 |
|---|---|---|
| Bed | All facilities: a bed meeting technical norms | 1–2 stars: mattress of at least 13 cm; 3–5 stars: flexible bed system with a mattress at least 18 cm high overall; 5 stars: singles 0.90 m, doubles 1.80 m wide, 2.00 m long |
| Bedside | All facilities: bedside table or equivalent | 3–5 stars: bedside table or tray |
| Wardrobe | All facilities: wardrobe or equivalent | All levels: adequate clothes storage with hangers (open or with doors); 3–5 stars: linen shelves or drawers |
| Seating | From 3 stars: at least one chair or armchair; 5 stars: a coffee table with a sofa or couch, or one armchair per person | 1–2 stars: one seat; 3–5 stars: one seat per person; 4–5 stars: an upholstered chair with side table; 5 stars: an extra upholstered chair or two-seat sofa in double rooms |
| Luggage | From 3 stars: luggage rack | 3–5 stars: luggage place or rack |
| Work surface | No provision | 1–2 stars: table or similar; 3–4 stars: clear working space with power and lighting; 5 stars: at least 0.6 m² of clear working space |
| Mirror | 5 stars: full-length mirror | 3–5 stars: dressing mirror |
| Curtains | All facilities: sheer and heavy curtains or equivalent | 1–4 stars: means of darkening the room; 5 stars: complete blackout |
The Hotelstars Union (HSU) is the umbrella body of hotel associations that share common star criteria; as of November 2026 it has 22 member countries, including Georgia. HSU scores bed size in steps: four steps from 0.80 to 1.20 m for single beds, 1.40 to 2.00 m for doubles and 1.90 to 2.20 m for length. Width and length become mandatory only at 5 stars.
HSU allows up to 15% of beds to fall below the width threshold, provided guests are told before the booking is confirmed. A 5-star room also needs at least 0.6 m² of clear working space. That is, for example, a 120 × 50 cm desk top.
For guests with disabilities, dimensions appear in the regulation's implementing communiqué. In an accessible room, wardrobe doors slide or are omitted, and the hanging rail is no higher than 140 cm. Room area limits furniture size, so these decisions go hand in hand with our guide to hotel room size.
Which durability tests should hotel furniture pass?
Hotel furniture durability is documented against European standards. EN 16139 for seating, EN 15372 for tables and EN 16121 for storage are written for non-domestic use; for beds, EN 1725 covers domestic and non-domestic use together. These standards set out safety, strength and durability tests. Test severity is chosen according to where the piece will be used and is written into the specification as a level.
| Furniture | Durability standard | Ignition test | Note |
|---|---|---|---|
| Chairs, armchairs, sofas | EN 16139:2025; test level 1 for hotels | EN 1021-1 and EN 1021-2; in the UK, BS 7176 medium hazard | Adult users up to 110 kg |
| Tables | EN 15372:2023; test level 2 for hotels | Not applicable to non-upholstered items | Surface tests: EN 12720, EN 12721, EN 12722 |
| Wardrobes, chests, cabinets | EN 16121:2023 | Standard excludes flammability | For wall-hung units, the wall and its fixings are excluded |
| Beds and bases | EN 1725:2023 | EN 597-1 and EN 597-2; in the UK, BS 7177 medium hazard | Domestic and non-domestic beds together |
| Upholstery fabric | Martindale abrasion test (EN ISO 12947-2) | Fabric and filling tested together | Woolmark guideline (wool fabric): 30,000 rubs for contract use, 40,000 for severe use |
The 2013 edition of EN 16139 defined two test levels. Level 1 covered general use such as offices, restaurants, cafés and bars; level 2 covered extreme use such as night clubs and transport terminals. The 2025 edition also gives test severity by application, in informative Annex F. Referring to this edition, SATRA recommends level 1 for hotel seating and level 2 of EN 15372 for hotel tables.
For upholstery fabric, the yardstick is abrasion resistance. The Martindale test rubs the fabric in cycles and counts the rubs until, under EN 14465, three threads have completely broken. Woolmark's IF-1:2016 specification recommends at least 30,000 rubs for wool upholstery in contract use and 40,000 in severe-use contract settings.
Storage furniture is tested for loads, doors and drawers under EN 16121. The standard covers the attachment parts of wall-hung units but not the wall itself or the fixing to it. Fixings for wall cabinets and headboard panels should therefore be specified separately on the drawings, to suit the wall construction.
How is the fire rating of hotel furniture determined?
The fire behaviour of upholstered hotel furniture is documented through ignition tests. Seating is tested to EN 1021-1 (smouldering cigarette) and EN 1021-2 (match flame equivalent). For mattresses and upholstered bed bases, the counterparts are EN 597-1 and EN 597-2. In Türkiye, both parts of EN 1021 are adopted as TS EN 1021-1 and TS EN 1021-2.
SATRA notes that EN 1021-1 and EN 1021-2 are the basis for upholstered seating in many EU states, though not in all of them. These tests assess a specific combination of cover and filling; they do not determine the ignitability of a complete piece of furniture. If the fabric or foam changes, the earlier report no longer covers the new combination.
The UK uses a more detailed classification. BS 7176 (upholstered seating) and BS 7177 (mattresses and bed bases) divide fire risk into low, medium, high and very high hazard. According to VisitBritain, hotels are medium hazard, and their furniture is expected to meet these two standards.
Medium hazard adds the crib 5 test, which uses a larger flame source, to the cigarette and match tests. A 2010 guide by FIRA, the furniture industry's research body, gives crib 7 as the source for high and very high hazard. The guide adds that parts of a hotel can be classed as high risk.
In Türkiye, the Regulation on the Qualifications of Tourism Facilities sets no ignition test or fire class for room furniture; it does require smoke detectors in rooms. In our view, the fire specification for furniture should rest on a fire consultant's risk assessment. Confirm current requirements with the Ministry of Culture and Tourism and the local fire service.
How often is hotel furniture replaced?
Turkish tourism regulation sets no replacement period for hotel furniture; the cycle depends on use, maintenance and brand standards. For US branded hotels, the usual cycle is reported as seven years for soft goods and 12 to 14 years for a full renovation. In Türkiye, TÜROB's hotel textile estimate treats curtains and upholstery fabric as items renewed every ten years.
Show the data as a table
| Item | Replacement interval (years) |
|---|---|
| Pillows and blankets (TÜROB estimate) | 5 |
| Soft goods, branded hotels (US) | 7 |
| Curtains and upholstery fabric (TÜROB estimate) | 10 |
| Full renovation, branded hotels (US) | 12–14 |
These intervals are observations, not rules. Neil Flavin, COO of HVS Asset & Hotel Management, told CoStar that brands were returning to "the seven-year cycle with replacing soft goods and the 12- to 14-year cycle for full renovations". In the same article, Loren Balsam of HotelAVE put the usual life of carpet at about seven years, and said hard flooring can extend this to 10 to 12.
TÜROB's August 2026 report assumes an average of 12 metres of upholstery fabric per room, plus 20% for public areas. It also assumes that a fifth of pillows and blankets are renewed each year, which implies a cycle of about five years.
The renewal budget depends most on whether furniture can be maintained part by part. In our view, replaceable upholstery covers, removable headboard panels and standard fixings extend furniture life before a full renovation is due.
What stages does a hotel furniture order go through?
In Picco's approach, a hotel furniture order moves through seven stages, from the room programme to installation and handover. The two most important are the technical specification and the mock-up room. The specification puts the quality criteria in writing; the mock-up room tests all the furniture in a real room before series production.
- Room programme and furniture scheduleItems, dimensions, quantities and layout for each room type.
- Technical specificationStandards and test levels, ignition tests, fabric abrasion, finishes and colours.
- Tender and manufacturer selectionTest reports, production capacity and delivery schedules compared.
- Shop drawings and samplesDrawings for every item; material and fabric samples approved.
- Mock-up roomOne room fitted out in full; dimensions, assembly and use checked.
- Series production and quality controlProduction to the approved sample; fabric from a single dye lot.
- Delivery, installation and handoverFloor-by-floor installation, snagging, care instructions and test reports.
SATRA recommends setting minimum performance and safety levels in a written specification. Buyers should look for evidence that products really meet those requirements, and test reports provide it. SATRA also advises suppliers to check local fire rules before quoting. In the UK context, the hotel operator is ultimately responsible for fire safety.
In the mock-up room, bed height, the bedside table's relation to the mattress top, wardrobe door swing and socket positions are checked together. A problem found at this stage is fixed in one room instead of hundreds.
How does Picco Architecture approach furniture in hotel projects?
In hotel projects, Picco Architecture treats furniture as part of the interior design. Our archive lists 14 hotel-category records: 10 in Georgia (5 in Batumi, 5 in Tbilisi), 3 in Antalya and 1 in Benghazi, Libya. Ten of them are hotel projects; the others are two sales offices in Tbilisi, a resort villa in Benghazi and a trade fair entry in Antalya. The Georgian hotel projects date from 2023 and 2024.
The Batumi records include Orbi City, Orbi Sea Tower, Orbi Beach Tower, Avenue by Orbi and Continental. Tbilisi includes Radisson Blu, Radisson Collection and Central Park Towers. In Antalya, the archive holds Baia Hotel in Kundu and Concept Boutique Hotel in Manavgat. The full list is on our hotel projects page.
Georgia is a Hotelstars Union member, which is why the table above sets the Turkish regulation beside the HSU criteria. In our approach, furniture is resolved on the same drawing as the room plan: bed width, wardrobe depth, circulation clearances and socket positions are fixed together.
On in-room technology, see our article on technology products in hotel rooms; on licensing, our guide to the tourism operation licence in Türkiye.
Let’s discuss your hotel project.
Leave a few details and our team will get in touch to discuss the scope, the budget and the next steps.
Prefer to talk now? WhatsApp Call Picco Architecture: +90 850 532 10 50
We have received your project enquiry.
Our team will review the information you shared and get in touch with you.
Frequently asked questions
Does Turkish tourism regulation require a fire test for hotel furniture?
The Regulation on the Qualifications of Tourism Facilities and its implementing communiqué set no ignition test or fire class for room furniture; the regulation does require smoke detectors in rooms. For upholstered furniture, TS EN 1021-1 and TS EN 1021-2 are published as Turkish standards. Decide with your fire consultant which tests go into the specification and what building fire regulations require, and confirm current rules with the Ministry and the fire service.
Can domestic furniture be used in a hotel?
Turkish regulation requires "a bed meeting technical norms" but does not separately regulate whether furniture is domestic or commercial grade. A product not tested to a non-domestic standard has undocumented durability in a hotel. In the UK, domestic fire standards are accepted in low-hazard premises such as self-catering accommodation.
Do boutique hotels have different room furniture rules in Türkiye?
Under the regulation, a boutique hotel has 10 to 60 rooms. Its guest bedrooms must meet the qualities set for 5-star hotel rooms. Five-star room items such as a seating group and a full-length mirror are therefore required in boutique hotels too. Bathrooms also need an illuminated magnifying mirror.
Which documents should you ask the manufacturer for?
Ask for a test report for each item that names the standard and the test level. For upholstered items, the ignition report should name the fabric and filling tested, and an abrasion report should cover the fabric. Add care instructions, warranty terms and a spare parts list. According to SATRA, buyers should look for evidence that the product meets the requirements; test reports show this.
How is mattress hygiene maintained in hotels?
The Hotelstars Union criteria score mattress hygiene: hygienic mattress covers earn 10 points, and an annual wash of the cover with thorough cleaning of the mattress earns 15. The explanatory note prefers washing the zipped cover to vacuuming or steaming, and calls for the mattress core to be cleaned professionally once every five years. Mattresses with removable covers make this easier.
Good hotel furniture decisions start when the room plan, star target and test requirements are set together at the design stage. To review your room programme and furniture specification with us, please get in touch.